fk6 double wound laminar sealing rings

FK6 laminar rings are double wound. They serve as a grease seal for plain and roller bearings and are also used as a protective seal in front of radial lip seals. Higher sealing performance is achieved by the FK6 laminar rings when exuding grease. They also provide better protection against dust, dirt and splash water. FK6 laminar rings are outstanding for their high retention force and have no joint gap. The combined ASKD or ISKD ring sets optimize the sealing as a result of the increased labyrinth effect.

FK6 Dimensions Table

Due to easier fitting in the grooves the ISD or ISKD arrangement is preferred over the ASD or ASKD arrangement where this is possible. The ring carriers can be manufactured from steel, cast iron or plastic.

	ASD Outside Clamping Double Rings 2 rings = 1 set No speed limit for housing or ring carrier		ASKD Outside Clamping Duuble Rings Combination 3 rings = 1 set No speed limit for housing Speed limit for ring carrier max 10m/s
	ISD Inside Clamping Double Rings 2 rings = 1 set No speed limit for housing Speed limit for shaft max 10m/s		ISKD Inside Clamping Double Rings Combination 3 rings = 1 set No limit for housing Speed limit for shaft max 10m/s